Golf what type of shaft

Generally golfers would have them fit into their iron shots as those are the shots that require more control and accuracy compared to distance.

Moreover, steel shafts do require a faster swing speed to generate the same distances as a graphite shaft. The main type of steel shafts used in the majority of golf clubs by all the major manufacturers is the stepped steel shafts. On a stepped steel shaft, you are able to see a step pattern throughout the body of the shaft. The tips are thinner and the top is thicker to produce the flexibility. This manufacturing process allows consistency from shaft to shaft and gives the same stiffness throughout an entire set.

The main difference for the rifle steel shaft is that the whole shaft is smooth from top to the bottom without steps. The difference with rifle steel shafts is that the flexes can be more exactly tailored for golfers as they use decimals to measure stiffness.

Rifle manufacturers claim that it provides greater accuracy due to the stepless design technology eliminating the energy-robbing steps found on most other steel shafts. Graphite shafts are more expensive compared to steel shafts. They are less durable and more lightweight. The light weight allows golfers to produce greater swing speeds for more power, but sacrifices control due to the flex generated during the swing.

Graphite shafts are mainly found in drivers and woods. Furthermore, they are often suited for female and senior golfers who cannot produce the swing speed to use steel shafts effectively.

There are variations in flexes and colours which make graphite shafts a popular choice amongst all golfers. The shafts weigh between grams as compared to steel shafts at around grams. Thanks to the lighter weight, it allows for more distance to be gained. However, getting a consistent feel is difficult compared to a steel shaft. A downside to graphite shafts is that they require more care. If the paint on the graphite shaft gets worn off, this will negatively affect the performance of the shaft.

These are new additions to the shaft market. Multi Material Shafts can be both used on drivers and irons as they combine both steel and graphite into one shaft to try and get the best of both worlds.

Typically the tip is graphite whereas the body of the shaft is steel. Whether you are repairing your broken golf club or buying a new golf club , there are a few things you should know before choosing a golf shaft. The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length.

Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order.

Read on to find out all about how to pick the right golf shaft for you in this guide. There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type.

There are some newer options that combine the two materials, known as multi-material shafts. Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are often made from carbon steel, but stainless steel is sometimes used, and start at grams. Therefore, steel shafts offer more control and have greater emphasis on accuracy than distance, which means that a faster swing speed is required to generate the same distance as a graphite shaft.

Steel shafts are recommended for players with normal swing speeds, who could do with more control when playing. Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams — around half the weight of a steel shaft!

When we put a customer through a fitting, we determine the right profile, weight, and flex that is required. The ability to fill that prescription properly will depend on whether we use a stock shaft or an aftermarket shaft. The difference between stock shafts and aftermarket shafts is usually found in quality control.

The graphics look attractive, but you really have no idea what is beneath it. We have found that most of the aftermarket shafts coming out of Japan are superior quality. Going back to our burger analogy — they are better chefs cooking with superior ingredients. The products have much tighter tolerances for mistakes.

Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course. There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some of the big questions you have surrounding shafts.

To book your next fitting in our Mineola location, or in New York City please visit this page. Ladies flex is most commonly available on graphite shafts. Chi is a professional journalist who has covered sports for more than 20 years at newspapers all over the United States. She has covered major golf tournaments and the NFL as well as travel and health topics.

Chi received her Bachelor of Arts in professional writing from Carnegie Mellon University and is working toward a master's degree in journalism. Golf club shafts are available in five main flexes.

Golf club shafts are available in five flexes and may be made of steel or graphite. Golfsmith: Order Golf Equipment Online.